Grading · Nov 2026
How we grade a used CAT excavator
The short answer
A grade is our six-check assessment of one machine. A means original major components and most of the undercarriage left; B is work-ready with cosmetic wear; C needs repair. The grade is not a warranty.
- Six checks decide the grade: structure, undercarriage, engine, hydraulics, cabin and documents.
- A 320D can run from about $12,600 to $22,400; grade, hours and undercarriage move the price.
- Buy the evidence behind the grade: undercarriage measurements, pump notes and the plate photo.
A grade is a shorthand, and shorthand is dangerous when nobody defines it. This page is the definition we use in Hefei. It is our own assessment of a used machine, not a manufacturer classification, and it is not a warranty.
What we look at before a grade is written
Every unit gets the same six checks. The grade is the summary of those findings, not a substitute for them.
- Structure — boom, arm, bucket linkage and main frame for cracks, welds and previous repair.
- Undercarriage — track shoes, rollers, idlers and sprockets, measured for wear.
- Engine — cold start, exhaust colour, blow-by and leaks around the block and injectors.
- Hydraulics — cylinder seals, hoses, pump noise and cycle speed on a loaded function test.
- Cabin and controls — glass, seat, monitor, error codes and every control function.
- Documents — plate, hour meter and any service record that came with the unit.
The three grades
| Grade | What it means in our yard | What it usually changes |
|---|---|---|
| A | Straight machine, original major components, undercarriage with most of its life left, no structural repair, clean cabin and working electrics. | Priced at the top of the range for its year and hours; the easiest unit to resell. |
| B | Work-ready with cosmetic wear. Undercarriage part-worn, minor leaks or documented repairs, cabin used but functional. | The normal working machine. Price follows the remaining undercarriage and the pump, not the paint. |
| C | Project machine. Undercarriage near the end, engine or hydraulic work needed, or a structural repair on record. | Priced for a buyer who will repair it. Only worth it if you have the workshop and the parts channel. |
We also list units without a grade. That is deliberate: a grade should not be invented before the checks are done.
Two machines, same model, different grade
Take our 320D stock. The range runs from about $12,600 to $22,400. The model badge is identical. The difference is the undercarriage, the hours, the pump and the era of the machine. A 2007 unit with 16,000 hours and a tired undercarriage is a B or C. A 2013 unit with 10,000 hours and original paint is an A. If a seller quotes you one price for a 320D, ask which unit and which grade.
What we photograph, and what we leave blank
We photograph the machine, the hour meter, the plate and the undercarriage. We film a cold start and a hydraulic cycle. If a field cannot be evidenced, we leave it blank and write confirmed on request rather than fill it with an estimate.
The same rule applies to the grade. If the inspection is incomplete, the unit is ungraded and the price is marked as subject to inspection.
How to use a grade when you buy
Do not buy the grade. Buy the evidence behind it. Ask for the undercarriage measurements, the pump test notes and the plate photo. If the answers are thin, the grade is thin too. A grade is a starting point for a conversation about the machine, not a substitute for one.
See the six checks · Browse current units
Figures in this guide come from the yard file and are reviewed on 19 Nov 2026. Prices are FOB China unless stated; a grade is an assessment, not a warranty.
Cite this guide
If you quote this guide, use this citation:
CAT Digger, "How we grade a used CAT excavator", https://catdigger.com/blog/how-we-grade-a-used-cat-excavator, reviewed 19 Nov 2026.


